Diversity of methanotrophs in a simulated modified biocover reactor

A simulated landfill biocover microcosm consisting of a modifying ceramsite material and compost were investigated. Results show that the mixture can improve the material porosity and achieve a stable and highly efficient (100%) methane oxidation over an extended operating period. The diversity of the methanotrophic community in the microcosm was assessed. Type I methanotrophs were enhanced in the microcosm due to the increased air diffusion and distribution, whereas the microbial diversity and population density of type II methanotrophs were not significantly affected. Moreover, the type I methanotrophic community structure significantly varied with the reactor height, whereas that of type II methanotrophic communities did not exhibit a spatial variation. Phylogenetic analysis showed that type I methanotroph-based nested polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) resulted in the detection of eight different populations, most of which are related to Methylobacter sp., whereas that of type II resulted in the detection of nine different populations, most of which are related to Methylocystaceae. Methanotrophic community analysis also indicated that a number of new methanotrophic genera not closely related to any known methanotrophic populations were present.     

人工湿地系统植被构建方式探讨

植物是人工湿地系统的核心之一,不但有助于污水净化,还能产生一定的生态环境效益.湿地运行初期植物的生长好坏直接影响到今后植物的生长和污染物的去除效率.面对新建的人工湿地,如何快速高效的构建植被系统,是工程建设中必须面对的一个重要问题.湿地植被构建方式的改进有助于提高湿地建设效率,改善系统处理效果.本文从工程角度探讨植物种植方式、种植时间、种植密度及湿地启动对湿地植被构建的影响.     

Evaluation of the emission characteristics of PCDD/Fs from electric arc furnaces

Distribution of PCDD/F (polychlorinated dibenzo-p-dioxin and polychlorinated dibenzofuran) congeners at two electric arc furnaces (EAFs) in Taiwan is evaluated via intensive stack sampling and analysis. Two kinds of exhaust system in EAFs including stack system and shutter system are selected for measuring dioxin emissions. In addition, dioxin emissions during oxidation and reduction stages at EAF-A were characterized. Results indicate that the PCDD/F concentration of stack gas in EAF-A was 4.39 ng/N m³ while total Toxic Equivalent Quantity (TEQ) concentration was 0.35 ng I-TEQ/N m³. The PCDD/F concentration of stack gas in EAF-B was 2.20 ng/N m³ and the TEQ concentration was 0.14 ng I-TEQ/N m³. 1,2,3,4,6,7,8-H_pCDF, OCDD and OCDF are the major contributors of the dioxin concentrations for two EAFs investigated and the percentage of PCDD/F in particulate phase increases as the chlorination level of the PCDD/F congener increases. The results obtained on gas/particulate partitioning of PCDD/Fs in flue gases prior to the APCD in EAFs indicate that more than 90% exists in particulate phase. In EAF-A, the PCDD/F concentration during oxidation stage is slightly higher than that measured during reduction stage, including the sampling points of CO converter outlet, prior to bag filter and stack. Majority of PCDD/Fs emitted from steel-making processes exists in particulate-phase (about 60–70%) at both EAFs investigated.     

Partitioning and removal of dioxin-like congeners in flue gases treated with activated carbon adsorption

Activated carbon adsorption is commonly used to control dioxin-like congener (PCDD/Fs and PCBs) emissions. Partitioning of PCDD/Fs and PCBs between vapor and solid phases and their removal efficiencies achieved with existing air pollution control devices (APCDs) at a large-scale municipal waste incinerator (MWI) and an industrial waste incinerator (IWI) are evaluated via intensive stack sampling and analysis. Those two facilities investigated are equipped with activated carbon injection (ACI) with bag filter (BF) and fixed activated carbon bed (FACB) as major PCDD/F control devices, respectively. Average PCDD/F and PCB concentrations of stack gas with ACI+BF as APCDs are 0.031 and 0.006ng-TEQ/Nm(3), and that achieved with FACB are 1.74 and 0.19ng-TEQ/Nm(3) in MWI and IWI, respectively. The results show that FACB could reduce vapor-phase PCDD/Fs and PCBs concentrations in flue gas, while the ACI+BF can effectively adsorb the vapor-phase dioxin-like congener and collect the solid-phase PCDD/Fs and PCBs in the meantime. Additionally, the results of the pilot-scale adsorption system (PAS) experimentation indicate that each gram activated carbon adsorbs 105-115ng-PCDD/Fs and each surface area (m(2)) of activated carbon adsorbs 10-25ng-PCDD/Fs. Based on the results of PAS experimentation, this study confirms that the surface area of mesopore+macropore (20-200A) of the activated carbon is a critical factor affecting PCDD/F adsorption capacity.     

Thermal hazard accident investigation of hydrogen peroxide mixing with propanone employing calorimetric approaches

Hydrogen peroxide (H₂O₂), historically, due to its broad applications in the chemical industries, has caused many serious fires and explosions around the world. Its thermal hazards may also be incurred by an incompatible reaction with other chemicals, and a runaway reaction may be induced in the last stage. This study applied thermal analytical methods to explore the H₂O₂ leading to these accidents by incompatibility and to discuss what might be formed by the upset situations. Thermal hazard analysis contained a solvent, propanone (CH₃COCH₃, so-called acetone), which was deliberately selected to mix with H₂O₂ for investigating the degree of thermal hazard. Differential scanning calorimetry (DSC) and vent sizing package 2 (VSP2) were employed to evaluate the thermal hazard of H₂O₂. The results indicated that H₂O₂ is highly hazardous while mixed with propanone, as a potential contaminant. The time to maximum rate (TMR) was used as emergency response time in the chemical industries. Therefore, TMR of H₂O₂ was calculated to be 70 min for runaway reaction (after T₀) and TMR of H₂O₂/propanone was discovered to be 27 min only. Fire and explosion hazards could be successfully lessened if the safety-related data are properly imbedded into manufacturing processes.     

GB/T 7702-2008《煤质颗粒活性炭试验方法》标准的研究

通过对GB/T 7702-2008《煤质颗粒活性炭试验方法》的修订,研究了国际上先进国家的ASTM、JIS、ГОСТ同类标准内容。本系列标准除等同采用部分国际先进标准外,还结合本国特点增加了部分国外标准没有的内容,同时着重对碘吸附值测定进行了深入研究,确定了国际先进的碘吸附值试验方法。     

基于AHP法的诱发露天矿作业现场碰撞事故危险点重要度排序

露天矿作业现场运行的设备碰撞事故属于安全生产重大事故,尽管发生并不频繁但是同类事故依然在生产中发生。控制诱发该类事故的危险点是现场安全管理的重点,根据现场的事故案例运用AHP法,通过对危险点排序找出其中的重要度,确定碰撞事故中的主要诱发因素,以此在动态生产中识别系统关键节点的危险性,找到预防同类碰撞事故的有效措施。由于诱发危险点在生产中的复杂性,AHP法解决的只是一段时间内的问题,但也为快速掌握安全预控问题提供了一种研究思路。这样在管理资源有限的条件下,为工艺运行的安全预防和控制提供可靠的保障。     

Design,Modelling and Assessment of Emission Scenarios Resulting from a Network of Wood Biomass Boilers

The use of wood biomass as a fuel for domestic and industrial heating systems allows for a reduction of CO₂ emissions at a global scale, but it may also result in worse local air quality conditions, due to their emissions of particulate matter. The aim of this study is to assess the actual trend of atmospheric pollution in a study area, assuming that all heating systems are replaced by small size biomass boilers linked to the buildings through district heating network. Ground level concentrations of particulate matter, emitted by different heating systems, are therefore evaluated through numerical simulations performed by means of an atmospheric dispersion model (Sirane). As a first step, we have compared the environmental impact of a woodchip boilers network with that given by the use of traditional heating systems, i.e. wood stoves and natural gas boilers. As a second step, we have analysed the impact of such a network taking into account different emission scenarios, related to different boilers operating conditions. Results show that the environmental performances of a woodchip boilers network can be optimized by combining it with other renewable sources of energy devoted to the supply of hot water. The adopted analysis methodology can be applied to other real or hypothetic punctual sources on the territory.     

The toxicity of cadmium ion (Cd2+) to phycocyanin: an in vitro spectroscopic study

Environmental Science and Pollution Research - The pollution of heavy metals is a severer problem for the ecosystems in waters. The toxicity of Cd2+ on phycocyanin (PC) is studied in molecular...     

长期缺氧吸磷驯化下强化生物除磷系统污泥除磷方式的转化

采用交替厌氧/缺氧/好氧运行的序批式活性污泥反应器(SBR),通过梯度投加电子受体NO_3~-,考察长期缺氧吸磷驯化下强化生物除磷(EBPR)系统的性能及除磷方式的转化。结果表明,当进水COD为300～450mg/L、PO_4~(3-)(以P计,下同)和氨氮分别为8、14mg/L时,驯化期间TN去除率均保持在75%以上,长期缺氧吸磷驯化对COD和氨氮的去除没有影响。硝态氮投加量为5mg/L时,EBPR系统因电子受体投加不足除磷性能迅速恶化,增加硝态氮投加量至10mg/L,经过近30d的恢复,缺氧吸磷率最高可达97.67%,进一步提高硝态氮投加量至15mg/L,系统内硝态氮的积累导致缺氧吸磷率下降。污泥吸磷小试结果表明,经缺氧吸磷驯化后,即使除磷性能欠佳的低浓度电子受体系统污泥也具有良好的反硝化吸磷能力,可见经NO_3~-长期驯化的缺氧吸磷系统有利于筛选以NO_3~-为电子受体的反硝化聚磷菌。